Cranes

• Capacities up to 20 Tons
• Spans up to 90 Ft
• This is the option is used when sufficient headroom is available.
• TRSG cranes can be used with wire rope or electric chain hoists.
• Available in either structural beams or box girders.
• The most cost-efficient option.

• Capacities up to 10 Tons
• Spans up to 78 Ft
• URSG cranes can be used with wire rope or electric chain hoists.
• Bridge speeds can be set to customers’ needs.
• Available in either Freestanding or Ceiling-Mounted Systems

• Capacities up to 300 Tons
• Spans up to 180 Ft
• TRDG cranes are normally used for cranes that require increased capacity.
• Normally, hoist mounts on the top between the bridge girders.
• Can be mounted between bridge beams for very low clearances if required.
• Available in Structural Beams or Box Girders.
• Note: Hoists are custom built to match the span between the crane girders.
• Typically allow 18” to 36” more hook

• Patented track provides a harder track that will allow for a smoother operation.
• Capacities: Up to 40 Ton
• Spans up to 60 Ft
• Completely Free-Standing or Ceiling-Mounted Systems
• Superior to I-Beams in durability, noise prevention & consistency
• Curves, switches and interlocks available
• Complete installation by Bohnert
• Crane Inspections
• 2 Year Warranty

Enclosed Track Cranes

• Rectangular coverage up to 34’ bridge and 124’ runway standard
• Capacities: 150 Lbs to 4.000 Lbs
• Completely Free-Standing, Ceiling-Mounted Systems or partially supported system
• Runway support centers available in 6’ to 30’ support incrementsWhy Choose Enclosed Track Crane Systems:
• Gorbel enclosed track systems require 33% less effort than structural systems.

• Capacities: From 1/4 to 5 Ton
• Spans from 8’ to 30’
• Heights from 10’ to 20’
• Mostly used in the auto-repair industry to remove engines

Structural Jib Cranes

• Capacities up to 10,000 Lbs.
• Manual and Powered Rotation
• Standard Boom Lengths to 20 Ft
• Indoor and Outdoor Applications
• Motorized rotation available
• Installation by Bohnert

• Capacities up to 10,000 Lbs.
• Standard spans up to 20’
• 200 Degree Rotation
• Indoor and Outdoor Applications
• Motorized rotation available
• Installation by Bohnert

• Capacities up to 10,000 Lbs.
• Standard spans up to 20’
• 360 Degree Rotation
• Indoor and Outdoor Applications
• Motorized rotation available
• Installation by Bohnert

• Free-Standing and Wall-Mount solutions available
• Capacities: Up to 1,000 Lbs
• Degree of rotation depends completely upon style of jib crane; up to 360 degrees
• Runway support centers available in 20’ to 40’ support increments
• Custom solutions available.

Other Crane Options

• Articulating jib cranes are best suited for applications where you must go around a wall to access your product.
• Capacities: Up to 2,000 Lbs
• Increased circular coverage area.
• Custom solutions available

• This is a great solution for tools that need to be mobile
• Capacities: Up to 150 Lbs
• Air hoses or electrical connections can be supported within the enclosed track system
• For uses with tools or welders

Gorbel Easy Arm

• Capacities of 165 Lbs and 330 Lbs
• Lift speeds as high as 180 FPM; low speeds less than 1 FPM
• Infinite Speed Control: The load moves in sync with the operator’s hand movements
• Capacity Overload: will not lift if load exceeds the rated capacity
• Operator Present Function: the handle grip uses a built-in photo sensor that doesn’t allow the unit to move unless the operator initiates the movement
• Float Mode Option: with only a 1/2 Lb of force, the operator can precisely orient loads throughout the full stroke range by manipulating the load with their hands
• Easy Installation: unit ships assembled and ready to be installed
• Free-Standing vs. Under-Hung
  • Free-Standing: Choose for easy relocation, no foundation necessary
  • Under-Hung: Choose for hook heights over 11 FT & covering multiple workcells

Gorbel Pivot Pro

• Capacities up to 150 Lbs
• Free-Standing or Wall-Mount
• Uses vacuum to pick up products
• Up to 3 times easier to start and stop than a workstation jib crane
• No festooning necessary
• Easier movement of loads close to the mast

Electrification

• 90 to 250 amp capacity
• Most efficient way to run electric over long distances
• More compact than festoon systems

• Uses flat or round cable in combinations with festoon trolleys to supply electric to the crane

Radio Controls

• Can be used with all models of cranes and at any capacity
• Up to 40 Hrs of continuous operating time
• Ability to control multiple cranes/hoists with a single control
• Durable enough for any manufacturing plants